Игольчатый радиатор 180х70мм для COB 100W

    The needle heatsink, due to the design, with a small size, has a large area. It can be located both in vertical and horizontal position. In the upper part there are holes for the installation of a 50mm fan.

     The heatsink is equipped with all the necessary mounting holes:

holder with LED arrays;
reflector fixing ring;
lenses with a diameter of 100mm, an angle of 90 °;
fixing the radiator in the lamp design.

     All indicated holes are threaded. Thread diameter for holder and reflector m3, metric. The diameter of the thread for the lens and fixation of the heatsink M4, metric. Additional holes for the withdrawal of the wire to the back from under the lens or reflector.

     The radiator is compatible with COB Cree CXB3070, Citizen CLU048;

     Passively cools the LED in operation up to 100W;

     With active cooling (fan) up to 140W;

     The overall size of the needle radiator is 180x70mm;

     Weight - 1.3 kg;